Category: Tag:


Round luminaire for installation on wall or ground –
Configuration: die-cast aluminium structure, EN AB-47100
alloy (low copper content) and AISI 316L blasted stainless
steel frame. Glass diffuser: Sandblasted with silkscreen
border, fixed to the aluminium body through a robotic
gluing system.
Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a first layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
finishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium fitting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
Protection rating: IP67
In compliance with EN 60598-1 standards
Class of insulation: mains: I; low-voltage: III
Installation: the luminaire is equipped with a piece of cable
for an easy-to-make connection. 220-230V version: the
cable is supplied with a 2-way connector for 3-conductor
cables (H2O STOP) for an easy-to-make connection. 24V
version: the cable is integrated with an H2O STOP device.
Outdoor use requires suitable flexible cables. Installation
requires a dedicated box to be ordered separately. It is
important to provide a >200mm gravel layer or a drain
system (for concrete surface) to ensure good drainage and
to avoid water stagnation.
We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.

Close Menu