Square or round luminaire – for installation in-ground
where recessing depth are limited (up to 120mm) –
Conﬁguration: die-cast aluminium structure, EN AB-47100
alloy (low copper content).
Double layer coating for high resistance to corrosion:
the aluminium components are painted with a double
coat using powders which are compliant with QUALICOAT
standards: a ﬁrst layer of epoxy powder (with excellent
chemical and mechanical resistance) and a second
ﬁnishing layer of polyester powder (resistant to UV rays
and atmospheric agents). The entire painting process of the
aluminium ﬁtting starts from components which have been
sandblasted in advance to make the surface more porous
and increase the adherence of the paint. Ares effects
alkaline and acid washing to clean the surfaces completely,
then rinses with demineralised water to remove any residue
particles, subsequently a chemical conversion treatment is
done to protect against rusting.
Protection rating: IP67
In compliance with EN 60598-1 standards
Class of insulation: I
Installation: the luminaire is equipped with a piece of
cable with a 2-way connector for 3-conductor cables (H
STOP) for an easy-to-make connection. RGB version: the
luminaire is equipped with 2 pieces of cable, no H
connector provided. Outdoor use requires suitable ﬂexible
cables. Installation requires a dedicated box to be ordered
separately. It is important to provide a >300mm gravel layer
or a drain system (for concrete surfaces) to ensure good
drainage and to avoid water stagnation.
We recommend the use of a connection system with a
protection degree greater than or equal to the protection
degree of the luminaire.